DVB-S/S2 Modulation, Model: MDS-151
$4,100.00
No tax
Delivered within 6-8 weeks
The modulator device is used to modulate and superimpose the original signal on the carrier frequency. The purpose of this work is to increase the frequency to transmit the image to the satellite. This modulator is 1U in size and can be installed in a rack. It also has the ability to receive 4 channels on ASI and 1 IP port. It supports DVB-S/S satellite standard for output. This modulator has an internal 10MHz and the ability to connect an external 10MHz. It can also use Re-Mux to rearrange TS.
Delivery policy
EXW
- 4 ASI inputs
- 1 IP input
- DVB-S/S2 output
- Support QPSK, 8PSK, 16APSK, 32APSK
- Remux feature
- Web management with Ethernet port
- Management through the front panel of the device
- It has an internal 10MHz
- Ability to receive external 10MHz and provide 10MHz output
- BISS Scramble
- 1U size and can be installed in the rack
MDS-151
Data sheet
- Input
- 1xIP, 4xASI
- Output
- 1xDVB-S/S2, N Type, 50 ohm
- Power Consumption
- 100-240VAC±10%, 50Hz-60Hz
- Dimension
- 48.2 × 41 × 4.4 cm
- DVB-S Constellation
- QPSK
- DVB-S2 Constellation
- QPSK,8PSK, 16APSK,32APSK
- DVB-S FEC/ Convolution Rate
- 1/2, 2/3, 3/4,5/6, 7/8
- DVB-S2 FEC/ Convolution Rate
- QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9,9/10 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
- Roll-off Factor
- 0.2, 0.25, 0.35
- DVB-S Symbol Rate
- 0.05~45Msps
- DVB-S2 Symbol Rate
- 0.05~40Msps (32APSK); 0.05~45Msps (16APSK/8PSK/QPSK)
Comments (0)
No customer reviews for the moment.
The modulator device is used to modulate and superimpose the original signal on the carrier frequency. The purpose of this work is to increase the frequency to transmit the image to the satellite. This modulator is 1U in size and can be installed in a rack. It also has the ability to receive 4 channels on ASI and 1 IP port. It supports DVB-S/S satellite standard for output. This modulator has an internal 10MHz and the ability to connect an external 10MHz. It can also use Re-Mux to rearrange TS.